Specify a CraftMaster Green Door

	Design: Any of the designs in the CraftMaster line of molded interior doors.†
	Core: Standard hollow core or solid core with GreenLite™ fiberboard door core.
	Stiles and Rails: Finger joint or clear wood.
	Thickness: Either 1⅜" or 1¾".
	Sizes: For available sizes, click here to view the size chart.

Hollow core CraftMaster Green Doors contain a minimum of 23% pre-consumer recycled wood content.

Solid core CraftMaster Green Doors contain a minimum of 48% pre-consumer recycled wood content.

CraftMaster molded door designs, used to make CraftMaster Green Doors, contain a minimum of 25% pre-consumer recycled wood content.

CraftMaster molded door designs have no added urea formaldehyde. This is certified by Scientific Certification Systems, certificate number SCS-MC-01802.

CraftMaster molded door designs (facings) comply with the California Air Resources Board's (CARB) Airborne Toxic Control Measure (ATCM) 93120 Phase 2 formaldehyde emission limits for composite wood as certified by the Composite Panel Association (CPA), a third party certifier (TPC-1). CraftMaster molded door designs have demonstrated formaldehyde emissions equivalent to background levels found in the environment.

CraftMaster products are primed with a low VOC primer. This primer is among the most environmentally preferable of all coatings available.

The adhesives used in CraftMaster Green Doors have ultra low VOC emissions.

Recycled Content

MR 4

Use materials, including furniture and furnishings, with recycled content such that the sum of post-consumer recycled content plus 1/2 of the pre-consumer content constitutes at least 10% or 20% based on the total value of the materials in the project. The minimum percentage materials recycled for each point threshold is as follows: 1 point for 10% recycled content and 2 points for 20% recycled content.

Regional Materials¹

MR 5

Option 1 (1 Point): Use a minimum of 20% of the combined value of construction and Division 12 (furniture) materials and products that are manufactured regionally within a radius of 500 miles.

Option 2 (2 Points): Meet the requirements of Option 1 and use a minimum of 10% of the combined value of construction and Division 12 (furniture) materials and products extracted, harvested or recovered, as well as manufactured, within 500 miles of the project.

Low-Emitting Materials – Composite Wood and Agrifiber Products

IEQ 4.4

Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing system) must contain no added urea formaldehyde resins.

Recycled Content

MR 4

Use materials with recycled content such that the sum of post-consumer recycled content plus 1/2 of the pre-consumer content constitutes at least 10% or 20%, based on cost, of the total value of the materials in the project. The minimum percentage materials recycled for each point threshold is as follows: 1 point for 10% recycled content and 2 points for 20% recycled content.

Regional Materials¹

MR 5

Use building materials or products that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site for a minimum of 10% or 20%, based on cost, of the total materials value. If only a fraction of a product or material is extracted, harvested, or recovered and manufactured locally, then only that percentage (by weight) can contribute to the regional value. The minimum percentage regional materials for each point threshold is as follows: 1 point for 10% regional materials and 2 points for 20% regional materials.

Low-Emitting Materials – Composite Wood and Agrifiber Products

IEQ 4.4

Composite wood and agrifiber products used on the interior of the building (i.e. inside the weatherproofing system) must contain no added urea formaldehyde resins.

Environmentally Preferable
Products

MR 2.2

Use building component materials that meet the following criteria:
a) Environmentally preferable products meet the specifications listed in Table 24 of LEED for Homes Rating System, includes: for doors (not including garage or insulated doors) contain recycled content, are FSC-certified or reclaimed
AND/OR
b) Local production¹ - use products that were extracted, processed, and manufactured within 500 miles of the home.

Recycled Content Building
Materials

604.1 (1)

Building materials with recycled content are used. A minimum of two recycled content products are used for minor elements of the building, such as all trim, cabinetry, plumbing, ductwork, doors, etc.

Resource-Efficient Materials

607.1 (2)

Products used contain fewer materials to meet the same end-use requirements as conventional production, including but not limited to engineered wood or engineered steel products.

No Added Urea Formaldehyde

901.4 (d)

85% of countertops, permanent shelving, and other nonstructural products manufactured in accordance with the following: composite wood or agrifiber panel products contain no added urea formaldehyde.